Skyworth TV 6A801 how to install APK software tutorial

Skyworth 6A801 smart TV installs sofa housekeeping tutorials via Android phone. This tutorial is applicable to Skyworth E710U, E690U, E510, E510E, G8200, E386E and similar models.

[Installation process]
1 Mobile phone install sofa butler mobile phone → 2 Mobile phone and TV use the same router connection → 3 mobile phone push install → 4 install successfully

【Steps】
1. Use your Android phone to download and install the sofa butler mobile version: http://pub.shafa.com/download/shafa_mobile.apk;
The
2. Run the sofa butler mobile phone version on the mobile phone;
The
3, the need for mobile phones and the need to install the sofa butler of the TV (or box) in the same LAN (for example, mobile phones and televisions use the same home Wi-Fi); sofa butler mobile phone page select "install sofa manager";
The
4. For other equipment than the Xiaomi brand, please select "other brand equipment installation";

5, find the IP corresponding TV (or box), and click on the connection; [If you do not show the corresponding device, click the connection fails, sofa butler phone version shows "find the device", please wait a moment]
The
6. After clicking the [Connect] button, the installation package will be automatically sent to the TV for installation. The installation process may take a few minutes. Please wait patiently.
The
7, mobile phone screen as shown in the figure, indicating that the installation has been successful.
The

It may take a long time for the sofa butler to connect to the TV. Please try to connect several times.

It may take a long time for the sofa butler to connect to the TV. Please try to connect several times. If you still cannot connect successfully, your TV needs to be set. Please turn on the settings as follows:

First, enter the factory mode to find the [local information], in the interface of the local information with the remote control sequentially enter the "up, down, left, right, or left", you can open the factory menu.

Second, open ADB
For example, Skyworth E660E: After entering the factory menu - Select [Common switch] - [ADB] is set to "On", the interface is as follows:
The
* The above is the interface of the Skyworth E660E model. The operation interface of each model is slightly different.
How to open each model:
42K1, 42K1T, 42K1Y, 42K1TY, 55K1, 55K1T:
- The ADB switch can be turned on in the advanced settings of the factory menu, and the password "123456" can be entered.

40K1Y, 49K1Y, 49K1C:
- There is an "Adbd Enable" in the other settings of the factory menu, and you can change the following parameter to 1.
The
40U1, 58U1:
- There are no ADB-related options in the factory menu, but it is said that the firmware will automatically open after upgrading to February 2014.
Note: After the ADB switch is turned on, some devices may need to be powered off to restart.

If the installation fails, restart the device and try again by following the steps (may be useful). Still have questions please add the following sofa butler official QQ group.