In 2012, the LED industry was ups and downs: production disorder, overcapacity, quality chaos, bankruptcy, corporate price wars, consumer trust in LEDs decreased... In 2013, with the development and reform commission and other six ministries jointly issued The semiconductor lighting energy-saving industry plan, the country has introduced a number of policies conducive to the development of the industry, the LED industry ushered in a good opportunity for development. Industry changes, how can companies choose to keep up with the development of the industry and occupy a strong position in the market?
Under the circumstance that the country issued the "Planning" to support the development of the LED industry, how does Delipu plan and deploy the market before facing the market background of LED lighting gradually turning to civilian use? In the face of the fierce competition in the LED driver power market, how does Delip achieve the “light and thin†revolution in driving power supplies, and what specific products have been introduced? In the new century, LED network reporter invited Wu Jie, general manager of Shenzhen Delip Optoelectronics Co., Ltd. to talk about the development of Delip in the new situation.
"Low cost" response to the market
The "Plan" proposes that by 2015, the market share of LED functional lighting products will reach more than 20%, and gradually increase the promotion of financial subsidies for LED lighting products. It also indicates that energy-saving and environmentally-friendly LED lamps will reduce prices and speed up the pace of entering the family. . Therefore, LED lamps are slowly shifting from commercial to civilian, and high performance and low cost will be the mainstream of the LED industry in the future. In the face of this trend in the industry, Delip is also embarking on market regulation and strategic adjustment.
As Delip, which is committed to producing cost-effective LED drivers, it pays more attention to the development of power supply driving in the process of popularizing LED lighting. It is widely believed in the industry that modularization and intelligence are the future development direction of LED drive power. Liu Muqing, vice chairman of the Shanghai Institute of Lighting and professor of the Institute of Electric Light Sources at Fudan University, emphasized that LEDs should be compatible and interchangeable in functional lighting applications, achieving modularization, standardization and standardization. The so-called modular LED is to use the light source, heat dissipating component, and drive power synthesis module to mass produce and manufacture standardized LED lighting products through the mold. In this regard, Wu Jie also said that if the LED industry really entered a period of rapid development, LED drive power will certainly be modular and intelligent development, and Delip has also begun to explore in these two directions. It is reported that Delip launched the Zhiwu series of products for the civilian market in 2013. Wu Jie said that according to the high price sensitivity of the civilian market, see my series strive to achieve the "low cost" advantage. In this regard, Pu Cheng particularly emphasized in the video interview of the reporters of the New Century LED Network that the so-called low cost is not a shoddy, but relies on the high integration of the industrial chain by Delip.
"Good design" improves quality
Pu admitted that the current LED lighting is further developing intelligently, and the driving power supply is to achieve perfect compatibility with high quality. In the context of de-energization, the future of LED driver manufacturers is shifting from single manufacturing to integrated technology services. In response to this market background, Wu Jie said that Delipo ensures the reliability and longevity of Delphi products from three aspects: power supply design, raw materials and production equipment technology, thus ensuring optimal design of power supply design and Market demand generates rapid response, which accelerates product circulation.
Specifically, these three aspects are based on the most mature solutions in the current LED industry for power supply design, and insist that all raw materials come from the first-line original factory. In terms of production equipment and technology, the company uses its own dual process and strictly controls the quality. Finally, in the case of quality assurance, the industry chain is integrated to reduce costs to meet market demand. In these three aspects, Delipe pays special attention to the power supply design. At the 2013 New Century LED Summit Forum, Pu Cheng discussed the core issues of power supply design in terms of efficiency, certification and cost. The so-called efficiency, that is, pay attention to the heat dissipation of the power supply, from the source is to control and reduce the heat generated by the power supply. With the upcoming new national standard and the foreign testing standards faced by major export companies, the power supply design must conform to the technical specifications and move towards standardization, certification and specialization. The low cost is the integrated industry chain mentioned above.
Future general lighting market LED lighting products will be designed for medium power (2835/4014/5630 and COB ), non-isolated high conversion efficiency circuits, low current high voltage output mode, easy to produce and transport plastic insulated enclosures and certified Low cost and rapid change. In the past, the resistor-capacitor step-down circuit used, the output current could not be constant with the voltage change, and the power frequency ripple strobe was severe, resulting in a short lamp life. The non-isolated power supply design of our series of products can effectively solve the above problems, achieve low current and high voltage output, keep the output voltage stable, and improve the life of the whole lamp. "So our products can be cost-effective, exquisite workmanship, stable and reliable performance." Wu Jie said.
Create an e-commerce platform to develop channels
The "Plan" proposes that by 2015, more than 60W incandescent lamps will be eliminated, and the output value of LED lighting energy-saving industry will increase by about 30% annually. In 2015, it will reach 450 billion yuan, of which 180 billion yuan will be used for LED lighting applications. In this regard, Lin Boqiang, director of the China Energy Economic Research Center of Xiamen University, said that the state encourages the elimination of incandescent lamps, which not only saves power resources, avoids waste, but also expands the market for LED energy-saving lamps. This undoubtedly indicates to the vast number of lighting companies the huge potential of the LED home lighting market.
In view of how to develop the home lighting market, some industry insiders pointed out that the e-commerce platform is the best channel for the popularization of the home lighting market. For example, GE Lighting has been stationed in major e-commerce platforms since 2012 and is mainly pushing LED products. The reporter learned from Zhu Jiejun of Delip Optoelectronics that Delip has successfully acquired a website this year and is working hard to build it into Delip's own unique e-commerce website. In this regard, Wu Jie also revealed that Delip's own e-commerce website is expected to begin operations in the second half of this year. Different from other companies, Delip has chosen to build its own e-commerce platform to achieve one-on-one direct communication with electronic trading customers, thus ensuring the authenticity of the products sold, in order to open up a larger LED home lighting market. Compared with relying on third-party e-commerce platform, independent construction of e-commerce platform can also reduce costs, reflecting Delipu's pursuit of "low cost" under the premise of ensuring high performance of products. In addition to exploring the e-commerce channel, when asked about the company's operational planning, Wu Jie also mentioned that Delip has changed to Shenzhen Delip Optoelectronics Co., Ltd. in 2012, and said that this action is for the company. Prepare for future listings.
This cable is one of the Control Cable and it is with OFC copper conductor insulated and sheathed by PVC material.
This cable may be used in dry or wet places and widely applied to transmit and distribute low voltage electrical power, data
or signal. there have optional choices of flexibility and screen material to
fit for installation as request. Some control cables can bear larger mechanical forces. Some of them is with shielding and flame retardant performance.
Product features
Conductor: OFC
Insulation and jacked: PVC
Color: Black
Other component: Optional screen(braided or Cu)
Performance: shielding or flame retardant
Classification
1-
Braided
screen type
2-
Copper
screen type
3-
Steel tape
armored type
4-
Flexible
control cable
5-
Braided screen flexible control cable
6-
Fire
retardant flexible control cable
7-
Copper
screen fire retardant control cable
8-
Flame
retardant steel tape armored type
9-
Fire
retardant flexible control cable
Application
The PVC insulated PVC sheathed control
cable is suitable for patching of control, signal protected and measures
systems with rated voltage up to and including 450/750V and 600/1000V.
Using features
l Rated power-frequency
rated voltage U0/U is 450/750V and 600/1000V
l Max. permissible
continuous operating temperature of conductor is 70℃
l The ambient
temperature under installation should not be lower than 0℃,if the ambient temperature is below 0℃, the cable should be preheated.
Why choose us?
l OEM service is available based on official & legal
authorization.
l Strict quality control system.
l Sufficient support for our tendering representatives.
l Faster lead time than our competitors.
l Professional Cable solutions to your particular requirements.
l Free sample is available with economic express fee.
l Excellent quality with reasonable price.
l Strong technical support (technical data, drawing, etc.)
FAQ
Q: Are you a factory or trading company?
A : We are a manufacturer. We are professional in
developing and producing electrical wires and cables since 2001.
Q: Can I visit your
factory?
A :Yes! You are welcome to visit our factory for further detail
check.
Our factory is located in Minqing, Fujian. You could choose to fly
to Xiamen/Fuzhou International airport. And tell us your flight No., We will arrange to pick you up
if you like.
Q: May I buy samples from you?
A: Yes! You are welcome to place sample order to test our superior quality and services.
Q: Can you put my brand name (logo) on these products?
A: Yes! Our factory accepts to print your
logo on the products.
Q: May I know the status of my order?
A: Yes .The order information and photos at different production stage of your order will be sent to you and the information will be updated in time.
To receive a quote, further information or advice, Leen Cable invites you
to contact us. And if you want to visit to know our production line and manufacturing
property, please confirm with us in advance for later arrangement.
PVC Insulated And Sheathed Control Cable
PVC Insulated And Sheathed Control Cable,Flame Retardant Control Cable,Flexible Control Cables,Flexible Shielded PVC Control Cables
Fujian Lien Technology Co.,Ltd , http://www.liencable.com