Solar water heater tank and pipeline insulation materials can be polystyrene insulation tube? Not good, because the solar water heater's water temperature can reach 90 degrees or more, polystyrene insulation material shrinks at this high temperature, so that the insulation layer has a large gap, poor quality at this temperature can occur more serious Shrinkage deformation.
With so much water in the solar energy, will the roof be crushed?
Normal roofs take into account loads, typically 150 kg/m2, and solar energy can be installed. If it is a light roof, it needs to be reinforced when installing solar energy.
How to fix the mounting bracket?
Generally, cement piers, expansion bolts, or steel wire ropes are used to fix several ways, and the best fixing method is selected according to the roof conditions.
Do you need to use expansion bolts to install solar energy?
Not necessarily, choose the appropriate fixing method according to the roof conditions.
Does expansion bolts break the waterproof layer?
If the expansion bolt can only be used, the expansion bolt may damage the waterproof layer and require waterproofing.
Is solar energy afraid of typhoons?
Solar energy removes the reflector, so that the windproof performance of the whole machine is greatly improved. In addition, the solar energy and the roof are firmly fixed together at the time of installation, and it is resistant to typhoon. When the typhoon is in place, ensure that the solar energy is full of water. In this case, the wind resistance performance is better.
Does the water heater need to be protected from lightning during installation?
Before installing the water heater, the lightning rod next to the water heater on the roof should be raised to a height of more than half a meter above the water heater, and the water heater tank must be effectively grounded; the indoor water outlet must be connected to the ground potential; it should not be used during thunderstorms. Water heater.
UFO High Bay Light, due to the unique shape, beautiful like UFO (UFO) and named. The use of high-precision fully automated equipment, a forming aluminum fins heat dissipation shell, good heat dissipation, the use of multi-chip high-power high-performance high light refers to the 3030LED lamp beads, light uniform, with Taiwan Mingwei circular power; , Effectively prevent the ambient temperature difference caused by fog, waterproof and dustproof performance. Long life, light fades small, can be widely used in outdoor and indoor harsh application environment.
As a new type of mining lamp, it uses the lens with light design, do not need to increase the reflector with additional light, so there is no traditional LED mining lamp in the transport process is easy to deformation of the reflector phenomenon, and transportation costs are relatively lower.
UFO LED High Bay Light,LED High Bay Light,UFO High Bay,LED High Bay Light UFO
Shenzhen Ri Yue Guang Hua Technology Co., Ltd. , https://www.ledlightinside.com