Look at the cable "black list" companies, where are the roads

Look at the cable "black list" companies, where are the roads Recently, many websites reprinted the unsatisfactory quality of wire and cable manufacturers in the coastal areas. The cable of nearly 60% of Guangdong Province was unqualified. On February 6, the Guangdong Provincial Administration for Industry and Commerce notified the Guangdong Province of the monitoring of the quality of wire and cable in circulation. Of the 100 products monitored, 63 were unqualified as a whole, and 37 samples were found to have failed.

In addition to the quality of some of their products is not their own products, some companies are actually posing as other companies. For example, in the domestic market, the well-known "Zhongce" cable was "fake" up to 20 in some markets! According to the relevant person in charge of this reporter’s visit to the quality inspection results, the price issue is the main reason for the low pass rate.

“Companies do not produce according to national standards, especially for small businesses, and they often use poorer materials to substandard them. This can easily lead to unqualified monitoring.” Wire and cable industry has a simple production process, low industry entry barriers and intense competition, and product prices. Too high no market, in order to save production costs, many companies, especially small businesses can only work hard on raw materials. In China's entire wire and cable industry, its production capacity ranks first in the world, but its production capacity is seriously over-supply. Most of its production is low-end products, the industry concentration is extremely low, and the market is in a mixed-race situation. The influence of the environment has led to a growing cycle of nausea.

At present, China's small and medium sized cable companies reached more than 7000, but made mostly low-end products, price competition has become a magic weapon numerous SMEs. Since wire and cable are typical materials and light industries, the price of raw materials accounts for 70% to 80% of the total cost. Therefore, the quality of raw materials affects the quality of wire and cable products to a great extent. ”

According to the staff of the Technical Department of the China Wire and Cable Association, the reason why a small company can provide ultra-low-cost products is simply to make a fuss about the raw materials and the quality of the products can be imagined. "On the other hand, some companies are also producing fake products. The products with good market sales have led to unqualified companies in monitoring.

This result has caused many people to worry about it and it is also curious to see how quality control tests can be conducted during the production of wire and cable. In fact, for the wire and cable, the quality inspection of the production process is carried out according to the requirements of the production plan, process instructions, and operating procedures. The classification according to the production process is nothing more than: product process inspection, patrol inspection, and completion inspection.

For these companies, in their own energy levels while the good quality of the vision of development open up new markets, break new ground, in terms of the current national economic planning, some wire and cable products market prospects are very good, there is a certain gap between supply and demand. If the business can be targeted to the industry adjustment of product structure, to guide the direction of national policy, Xiao Bian believe the future of the cable industry road to closer and better.

Fingerprint Lock Motor introduction:

Basic security work, lock body responsible for the security door lock body responsible for opening and closing lock, the lock body  Lock Motor  is of crucial importance.


Functions: it is widely used in various intelligent locks, such as Shared bicycle lock, fingerprint lock, glass lock, safe lock, hotel lock, family lock, inductive smart lock, etc


Features:Fingerprint Lock Motoris based on micro precision reducer development, small intelligent micro precision reducer can do 10 mm in diameter, is widely used in safe, locks, smart locks, sensor intelligent lock;

This kind of motor has the characteristics of low noise, low energy consumption, small volume, light quality, high precision, large torque and durability

Method of use: the best stable in horizontal plane, installed on the Fingerprint Lock Motoroutput shaft parts, cannot use a hammer to knock, knock prone to press into the dc Fingerprint Lock Motor  drive, may cause damage to internal components, and cannot be used in the case of blocked.

Lock motor

Operating temperature range:

 lock motor should be used at a temperature of -10~60℃.

The figures stated in the catalog specifications are based on use at  ordinary room temperature catalog specifications re based on use at ordinary room temperature  (approximately20~25℃.

If a  lock motor  is used outside the prescribed temperature range,the grease on the gearhead area will become unable to function normally and the motor will become unable to start.Depending on the temperature conditions ,it may be possible to deal with them by changing the grease of the motor's parts.Please feel free to consult with us about this.


Storage temperature range:

Fingerprint Lock Motor should be stored ta a temperature of -15~65℃.

In case of storage outside this range,the grease on the gearhead area will become unable to function normally and the motor will become unable to start.


Service life:

The longevity of Fingerprint Lock Motor is greatly affected by the load conditions , the mode of operation,the environment of use ,etc.Therefore,it is necessary to check the conditions under which the product will actually be used .The following conditions will have a negative effect on longevity.Please consult with us should any of them apply.



●Use with a load that exceeds the rated torque

●Frequent starting

●Momentary reversals of turning direction

●Impact loads

●Long-term continuous operation

●Forced turning using the output shaft

●Use in which the permitted overhang load or the permitted thrust load is exceeded

●A pulse drive ,e.g.,a short break,counter electromotive force,PWM control

●Use of a voltage that is nonstandard as regards the rated voltage

●Use outside the prescribed temperature or relative-humidity range,or in a special environment.

●Please consult with us about these or any other conditions of use that may apply,so that we can be sure that you select the most appropriate model.


when it come to volume production,we're a major player as well .each month,we rurn out  600000 units,all of which are compliant with the rohs directive.Have any questions or special needed, please contact us, we have the engineer group and best sales department to service to you

Looking forward to your inquiry. Welcome to our factory.

Lock motor

Fingerprint Lock Motor

Fingerprint Lock Motor,Motor For Fingerprint Lock,Gear Motor For Fingerprint Lock,Dc Motor For Fingerprint Lock

Shenzhen Shunchang Motor Co., LTD. , https://www.scgearmotor.com