Unveiled the mystery of [LCD screen mutual substitution] with a simple operation method - News - Global IC Trade Starts Here.

Probe domestic switch needle KG-300K needle head diameter is 3.0mm, normally open switch needle

Electronic scale crystal oscillator 3.2*2.5mm 3225 16M (16.000MHZ) 12PF 10PPM 20PPM 30PPM

Huaqiang Square crystal original spot stock

When it comes to replacing an LCD screen, many technicians often feel a sense of anxiety, fear, and uncertainty. This emotional state can make the process seem more complex than it actually is. In reality, with proper preparation, understanding of the procedure, and a calm mindset, the task is quite straightforward. It's important to be confident, methodical, and prepared for any unexpected issues that might arise during the operation. I’ve never used suction cups when replacing screens in sizes ranging from 22 inches to 52 inches. Instead, I rely on a few basic tools and a clear step-by-step approach to complete the job efficiently and safely. Below, I'll walk you through the entire process with simple illustrations and explanations: 1. Start by taking the faulty screen as a reference. As shown in Figure 1. 2. Place the TV screen that needs to be replaced on the workbench. Remove the back cover and take off the bezel. As seen in Picture 2. 3. Once the back cover is removed, take out all the screws and accessories attached to the frame. As shown in Figure 3. 4. After removing the accessories, lay both the old and new screens flat on the workbench. Use a screwdriver to remove all the screws from the metal frame and carefully take off the frame along with the old screen. Make sure not to move the screen at this stage. As shown in Figure 4. 5. With the metal frame removed, prepare two vertical objects. Gently hold the edges of the screen and the frame with both hands, keeping them balanced and aligned. Carefully tilt the screen onto the vertical objects, making sure it’s angled forward about 5 degrees. Then separate the screen from the frame, align it vertically, and insert it into the new frame. This step requires precision and steady movement to avoid damaging the screen. As shown in Figure 5. 6. Once the screen is properly seated in the frame, return the whole assembly to a horizontal position. Reattach the metal frame and tighten the screws evenly around the four sides. Avoid using power tools to prevent crushing the screen. As shown in Figures 6 and 7. 7. After securing everything, reinsert the internal components, mount the back cover, and fasten the screws. At this point, the LCD screen replacement is complete. As shown in Figure 8. 8. Finally, power on the device and perform a test to ensure everything works correctly. As shown in Figure 9. This guide reflects my personal experience and methods, and it does not represent any official guidelines or opinions. If there are any inaccuracies or areas that could be improved, please feel free to share your thoughts. Thank you!