Fujitsu BSC, which is engaged in system development and IT services under the Fujitsu Group of Japan, will launch the "Solar Cubic A-1" LED (Light Emitting Diode) solar light with USB charging function and FM radio on August 25, 2011. The product is in the shape of a cube, uses the solar panel above to generate electricity, and then stores the power in a lithium polymer rechargeable battery.
In response to the Great East Japan Earthquake, the awareness of disaster countermeasures and power saving has been increasing. In response to this situation, Fujitsu BSC commercialized the product. In terms of size, the length, width and height are both 15cm and the weight is 790g. The solar panel uses a single crystal panel having a size of 13.1 cm x 13.5 cm, a voltage of 6 V, and a power of 2.4 W. The capacity of the lithium polymer rechargeable battery is 2600 mAh. In terms of charging time, it takes 8 hours to use the solar panel. In addition, you can also use the AC adapter to charge, in this case you need to charge for 7 hours.
A 32-inch high-brightness white LED is used. The four sides of the cube will illuminate, and the illumination direction can be selected from six modes depending on the specific application, and the brightness can be adjusted in four levels. In the case of full charge, the illumination time is 8 to 44 hours depending on the brightness of the three-sided illumination, and the illumination time of up to 109 hours can be ensured when the illumination is on one side and the brightness is the lowest. The standby time when fully charged is about 2 years, and the power can be saved for a long time.
FM radios are used to collect information in an emergency. The sound can be emitted through the bottom speaker and transmitted 360 degrees to the surroundings. The frequency is 76-90MHz, and the battery working time is about 40 hours. The Solar Cubic A-1 provides 5V and 0.5A power via a USB terminal, and is mainly used for products that support USB charging such as mobile phones, and USB-powered products. The price is 10,290 yen (856 yuan). The company will promote it as a power source, light source and information source for power outages and outdoor use, and strive to achieve annual sales of 100,000 units.
In response to the Great East Japan Earthquake, the awareness of disaster countermeasures and power saving has been increasing. In response to this situation, Fujitsu BSC commercialized the product. In terms of size, the length, width and height are both 15cm and the weight is 790g. The solar panel uses a single crystal panel having a size of 13.1 cm x 13.5 cm, a voltage of 6 V, and a power of 2.4 W. The capacity of the lithium polymer rechargeable battery is 2600 mAh. In terms of charging time, it takes 8 hours to use the solar panel. In addition, you can also use the AC adapter to charge, in this case you need to charge for 7 hours.
A 32-inch high-brightness white LED is used. The four sides of the cube will illuminate, and the illumination direction can be selected from six modes depending on the specific application, and the brightness can be adjusted in four levels. In the case of full charge, the illumination time is 8 to 44 hours depending on the brightness of the three-sided illumination, and the illumination time of up to 109 hours can be ensured when the illumination is on one side and the brightness is the lowest. The standby time when fully charged is about 2 years, and the power can be saved for a long time.
FM radios are used to collect information in an emergency. The sound can be emitted through the bottom speaker and transmitted 360 degrees to the surroundings. The frequency is 76-90MHz, and the battery working time is about 40 hours. The Solar Cubic A-1 provides 5V and 0.5A power via a USB terminal, and is mainly used for products that support USB charging such as mobile phones, and USB-powered products. The price is 10,290 yen (856 yuan). The company will promote it as a power source, light source and information source for power outages and outdoor use, and strive to achieve annual sales of 100,000 units.
The Fiberglass Cable Tray is made by fiberglass reinforced plastic with fire retardant and other materials in it,and are pressed by composite moulded materials and stainless steel shielding nets.This kind of Cable Tray has the advantages of fire insulation,self-extinguishing,corrosion preventive,and light weight. Can fit for any cables which rated voltage under 10kv.
Fiberglass Cable Tray
Fiberglass Cable Tray,Fiberglass Flexible Cable Tray,Grid Type Fiberglass Cable Tray,Fiberglass Reinforced Plastic Cable Tray
Jiangsu Loncin Electrical Equipment Co.,Ltd , https://www.loncincabletray.com