Many friends may have encountered such a problem, that is, the remote control of the Tmall Box is not working properly with the remote control. Some solutions can also be found on the Internet. Here I will also tell you the solution. We can do a reference! (This method is applicable to Lynx Box 1 and 1S)
Lynx Box Exchange Group:
Specific solution:
I. Check if the battery of the remote control is not powered. Press the power button. If the power of the remote control is off, the power supply is insufficient (if there is a small amount of power, the light will be on but the button operation is invalid). The battery can be removed and reloaded. Try it out or replace it with a button battery.
If the battery is normal, try the remote control again.
Second, try to re-code
Lynx Box Matching Method:
Unplug the power of Lynx Box; press the “Volume+†and “Volume-†keys on the remote control at the same time, do not let go and keep this state, and plug the power of Lynx Box at the same time; Lynx Box is powered on, When you see the kitty moon fishing start screen on the TV screen or the kitten wriggles (preferably to this interface and then release), you can release the two keys of the remote control; at this time, the remote control LED The red light flickers and the code starts. When the code is successful, the red light will only go off after a few flashes.
Pairing is completed, if not, it may be that during the distribution process, the buttons are released, and no pairing is done. Then, retry the steps above.
Precautions:
Put the battery in. Note that the positive “+†is facing upwards. After installing the battery, close the battery cover and tighten it clockwise.
Test whether the remote control is powered on: On the left side of the remote control, near the power button, there is an LED indicator. Press the red POWER button. If the lamp is lit red, the remote control itself is powered and the battery is not installed. The indicator lights of the other keys of the TMB-100A will light, and the indicators of the other keys of the TMB-100E and TMB-100C will not light up; the model of the box can be viewed on the back of the box.
Lynx Box 1s code method:
With the box (50 cm), long press the OK button + return button light, it will flash three times, after three flashes, the code is successful.
Next: Lynx's box connected external audio, power amplifier problems! Pro-test valid
Install sofa butler: http://app.shafa.com/shafa.apk , the perfect companion for Lynx Box!
Lynx Box Exchange Group:
Specific solution:
I. Check if the battery of the remote control is not powered. Press the power button. If the power of the remote control is off, the power supply is insufficient (if there is a small amount of power, the light will be on but the button operation is invalid). The battery can be removed and reloaded. Try it out or replace it with a button battery.
If the battery is normal, try the remote control again.
Second, try to re-code
Lynx Box Matching Method:
Unplug the power of Lynx Box; press the “Volume+†and “Volume-†keys on the remote control at the same time, do not let go and keep this state, and plug the power of Lynx Box at the same time; Lynx Box is powered on, When you see the kitty moon fishing start screen on the TV screen or the kitten wriggles (preferably to this interface and then release), you can release the two keys of the remote control; at this time, the remote control LED The red light flickers and the code starts. When the code is successful, the red light will only go off after a few flashes.
Pairing is completed, if not, it may be that during the distribution process, the buttons are released, and no pairing is done. Then, retry the steps above.
Precautions:
Put the battery in. Note that the positive “+†is facing upwards. After installing the battery, close the battery cover and tighten it clockwise.
Test whether the remote control is powered on: On the left side of the remote control, near the power button, there is an LED indicator. Press the red POWER button. If the lamp is lit red, the remote control itself is powered and the battery is not installed. The indicator lights of the other keys of the TMB-100A will light, and the indicators of the other keys of the TMB-100E and TMB-100C will not light up; the model of the box can be viewed on the back of the box.
(However, the 100C model is a code that needs to be plugged in with power, that is, without plugging in the power supply)
Lynx Box 1s code method:
With the box (50 cm), long press the OK button + return button light, it will flash three times, after three flashes, the code is successful.
Next: Lynx's box connected external audio, power amplifier problems! Pro-test valid
Install sofa butler: http://app.shafa.com/shafa.apk , the perfect companion for Lynx Box!